Skip to content
BREAKING NEWS

WHITE TRASH NETWORKS / PARTS & MODS

Knucklehead Parts & Mods

1936–1947 factory engines / separately identified aftermarket KN builds. Engine-specific upgrade paths, supporting parts and workshop decisions.

WTN American motorcycle artwork
THE WTN PARTS COUNTERDEDICATED TO BROTHERHOOD & AMERICAN IRON

KNOW THE COMBINATION

Separate an original 61 or 74 cubic-inch engine from a modern Knucklehead-style replacement. Similar rocker covers do not establish the same crankshaft, bearings, oiling or primary-drive fitment. The frame, cases, top end and transmission each need their own identification on a custom.

A concrete example: the S&S KN93 uses a later-style sprocket-shaft/bearing arrangement and calls for a compatible later tin-primary/sprocket combination. That is an installation dependency, not just a change in displacement. Order against the manufacturer and serial number of the actual engine.

THREE WAYS INTO THE BUILD

Preserve the character

Restore sealing, ignition stability, charging and control operation first. Keep the original architecture where it remains sound, and retain a record of any non-original components.

Improve road manners

Match a modest cam or induction change to compression, starting method and available fuel. Budget for valve-train inspection and setup rather than assuming an external carburettor change completes the job.

Build a larger replacement

Treat an aftermarket engine as an engine-installation project. Check primary, transmission, mounts, exhaust and electrical requirements before choosing displacement or finish.

ENGINE, INTAKE & IGNITION

Cams, heads & internal parts

For a stock-style top-end job, specify bore condition, piston/chamber combination, valve guides, seats, rocker condition and solid-tappet hardware together. Intake and exhaust tappets are not automatically identical. If cam, compression or displacement changes are planned, include checking valve motion and the rotating assembly in the machine-shop brief.

Intake, exhaust & fueling

Choose a carburettor around the manifold, port arrangement and intended road use. Include a proper support bracket and air-cleaner clearance. Diagnose manifold leakage, float/fuel-delivery trouble and worn throttle parts before enlarging the carburettor. An exhaust should have secure support and useful clearance as well as the intended sound.

Ignition, starting & electrics

Identify magneto, points or electronic ignition and the bike’s actual system voltage. A conversion needs compatible charging equipment, coil where used, lamps, battery and wiring. Check timing and starting behaviour using the installed ignition instructions; a modern module’s default setting is not an engine-specific tune.

The purchase specification

Keep engine year, fitted parts, intended fuel, riding load and useful rpm range on the same order. Identify included hardware, supporting parts, machining, setup and calibration separately. Compare the complete installed package, not only the price of its main component.

SUPPORTING SYSTEMS

Oil, breathing & cooling

Trace supply, return, rocker-feed and breather arrangements from the correct drawings. Inspect repaired fittings and old hose before adding an oil cooler or replacing a pump. Distinguish wet-sumping after storage from genuine consumption and external leakage. Verify the oil-level check under consistent conditions.

Clutch, primary & final drive

Primary alignment, sprocket-shaft arrangement, clutch hub, chain line and transmission mounting must be checked as a package. An electric-start conversion can involve primary housings, ring gear, battery capacity and frame packaging. Verify the complete system before buying a starter motor on its own.

Suspension, brakes & chassis

A Knucklehead engine does not identify the frame or fork in a custom. Order brakes, wheels and suspension from the installed chassis specification. Record axle, bearings, brake mounts and tire clearance; a later front end is a geometry and brake-system project, not simply a bolt-on styling change.

Completion checks

Keep the original complaint and acceptance criteria on the work order. Record cold/hot starting, leak checks, control operation and the relevant loaded test. Include any follow-up inspections or service requirements specified by the installed parts manufacturer.

FROM A PARTS LIST TO A WORKING BIKE

For a hard-starting 74-inch road bike, the first work order should describe hot versus cold starting, ignition type, intake condition and valve adjustment. Approve a cam or carburettor purchase only after the fault is isolated. The useful result is repeatable starting and clean road operation, not an unverified horsepower estimate.

WTN build-planning example, not a claim of a measured WTN test result. Use the correct factory manual and component instructions for installation procedures, torque values and clearances.

REFERENCE DESK

Open the Knucklehead engine library · All engines and Parts & Mods departments

Original WTN parts-planning notes. References checked 17 November 2026. Product examples explain application differences; availability and final fitment must be confirmed against the current instructions.